|Part No.||SIZE MM X BSP|
|15SVBTC-W||15MM X 1/2"|
|15SVBTC||15MM X 1/2"|
Plastic Angle Service Valve Product Description
The plastic angle service valve with tap connector is for the connection of plastic and copper pipe. It has been designed, manufactured and assembled in the UK by John Guest Speedfit.
The angle service valve allows the user to stop the flow of water to a tap in case of emergency or repair via a 1/4 turn of a screw on the valve there is a 90-degree bent nut which can be tightened on to a side entry tap, toilet or male thread.
To install, simply push the valve fully on to the pipe and connect the tap connection to the thread. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.
Installation with this fitting can be reduced by around 40% against traditional fixing methods.
Features of the Plastic Angle Service Valve
- Not suitable for central heating systems
- Push-fit and demountable connections
- Lead-free and non-toxic
- No scale build-up and corrosion free
- BSI and WRAS approved