|Part No.||SIZE MM X BSP||LENGTH|
|FLX43P||15MM X 1/2"||150MM|
|FLX34P||10MM X 1/2"||300MM|
|FLX35P||15MM X 3/8"||300MM|
|FLX15P||15MM X 1/2"||300MM|
|FLX16P||15MM X 3/4"||300MM|
|FLX22P||22MM X 3/4"||300MM|
|FLX18P||15MM X 1/2"||500MM|
|FLX20P||15MM X 3/4"||500MM|
|FLX19||22MM X 3/4"||500MM|
|FLX19P||22MM X 3/4"||500MM|
|FLX23||22MM X 3/4"||FULL-BORE|
|FLX23P||22MM X 3/4"||FULL-BORE|
|FLX40||15MM X 1/2"||1000MM|
|FLX40P||15MM X 1/2"||1000MM|
|FLX42||15MM X 3/4"||1000MM|
|FLX42P||15MM X 3/4"||1000MM|
|FLX41||22MM X 3/4"||1000MM|
|FLX41P||22MM X 3/4"||1000MM|
Speedfit X Union Nut Product Description
Push-fit Speedfit X Union Nut flexi hose for the connection of plastic and copper pipe to a male thread appliance. It has been designed, manufactured and assembled in the UK by John Guest Speedfit.
Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.
The Speedfit X Union Nut fitting ensures an easier working environment in confined places and removes the need for hot works on site.
Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Features of the Speedfit X Union Nut
- Push-fit and demountable connections
- WRAS approved
- 6 Bar @ 65 °C
- Not suitable for central heating system